Plastic Recycling Machine
-
DYSSQ Light Single Axle Shredder
In order to be environmental and to meet different requirement of capacity and product, DYSSQ shredder is promoted and it can be used to shred injection product, blow moulding product, plastic thick plate, building shuttering,film and blow molding material. According to different feeding method, belt conveyor and crusher are optional.
-
DYSSZ Heavy Single Axle Shredder
In order to meet requirement of waste material recycling and high capacity in different fields, DYSSZ shredder can be used to shred big plastic block, waste wood log, waste paper, electric product and rubber product such as refrigerator cover, left over material, pallet, packed waste material, blow moulding bucket, pipe and film.
-
Two shaft shredder
Waste tyre recycling production line is composed of several kinds of heavy equipment, waste tyre recycling crushing processing equipment jwell can provide. The pretreatment of the tire uses the large biaxial shredding machine, automobile tires, directly after shredding tires by conveyor to the sieving machine for material screening, screening of conveying to the next level after mill for further refining processing.
-
Dyps-g Series Strong Crusher For Pipe
DYPS-G series heavy pipe crusher can crush middle diameter pipe directly without shredding in advance. This series crusher inlet is specially designed for plastic pipe, the pipe and the crusher rotor form a certain angle to reach the best crushing eff ect, crushed pipes and profiles up to 6 meters in length.
-
DYPS-S Sheet Crusher
It is difficult to crush the quite width of PP/ABS/PMMA sheet, plates and foam coil material with thickness 0.2~3mm. The DYPS-S can solve this problem. Comparing with ordinary crusher, this series crusher add a set of haul-off device, two sets of press roller, air press controller.
-
DYPS-X Profile,WPC Series Special Use Crusher
The traditional crusher for crushing plastics, profiles and WPC products existing certain difficulties,there need large crushing cavity to crush large volume and quantities material.
-
DYPS-Z Series Heavy Crusher
DYPS-Z series heavy crushers are designed specially for the recycling material which is not easy to be crushed and thickness 3~30mm.
-
DYSSG Pipe Crusher and Shredder Unit
DYSSG shredder is able to shred the PE, PP, PVC pipe with diameter 1200mm, the length of 3-6m pipe can be shredded directly without cutting, and the rotary speed is slow and stable. Variety of pipes is put into theflat feeding tank, and the tanks closed automatically, and push the pipe by hydraulic into the center axis for shredding.The material after crushing is transported by conveyor belt for secondary crushing in order to get the requested granule.
-
DYSSJ Universal Single Axle Shredder
DYSSJ shredder series from cooperation of sturdy pushing feeder and directional heavy bearing, which make the operation more safety. Standard seratted pushing feeder is equiped to the DYSSJ shredder, which makes it easier to shred big blocks pallet and wood.
